800.238.8480
1819 Victory Blvd. Glendale, CA 91201
Monday - Friday, 9am - 6pm Pacific
Saturday - Sunday: Closed

JuicedLink RA333 Riggy Assist Low-Noise Preamp

Be the first to review this product

  • For DSLR Cameras
  • AGC Disabling
  • Headphone Output
  • LED Metering
  • 3 XLR Input Low-Noise Preamp
  • Super Small & Light Footprint
  • 48V & 12V Phantom Power
  • Alkaline/LiPolymer Battery Operation
  • Selective Power-Down Mode
  • Made in USA

 

MFR#: RA333

Free Shipping

$469.00
Juicedlink

Description

Details

The JuicedLink RA333 Riggy Assist Low-Noise Preamp is a straightforward, miniature, and flexible microphone preamplifier for use with DSLR cameras. The RA333 Riggy Assist provides Automatic Gain Control disabling, headphone monitor output and LED display, allowing it to be used with most DSLR cameras. There are 3 built-in XLR inputs and a single 1/8", 3.5mm stereo output, input gain control, 48V and 12V phantom power.

The RA333 is capable of alkaline or LiPolymer battery operation and its small, lightweight enclosure allows for flexible mounting and room for accessories. Simultaneously "rig" optional accessories onto the top and side of the RA333 Riggy Assist for flexible mounting options unheard of from a preamplifier this small. Camera Overload Protection - Audio Output Bracketing sends all 3 channel signals to the left and right outputs, with a 16dB attenuated signal at the right output. This allows for a secondary signal to be recorded in case the primary signal peaks or distorts.

Automatic Gain Control disabling

  • Headphone output
  • 4 segment R/L meters which can be calibrated to camera

Riggy Mounting Options

  • Three XLR input low-noise preamp, amplified mic level output - 3.5mm stereo mini jack
  • Optional accessory bracket allows mounting of numerous other components, such as microphones, wireless receivers.
  • Designed to Optimized Battery Life Efficiency
  • Switchable between Alkaline and LiPoly 9V battery use
  • Selective power down mode to turn off portions of the preamp
  • two XLR channels and/or meter not being used

Battery Life

6hr battery life - no phantom, all 3 XLR inputs active, Alkaline battery

48V phantom power, and power saving 12V phantom mode

Camera Overload Protection

  • Audio Output Bracketing duplicates the left channel on the right channel at lower signal level - approximately 16dB lower. If the camera overloads on the main signal on the left channel, you have a backup at a safe lower level on the right channel
  • Audio Output Bracketing adds no noise or distortion, in contrast to the noise and distortion created by limiters. It also consumes no battery power.
  • Mic/Line Switches for each XLR channel
  • Hi/Lo Gain Switches for each XLR channel
  • Mono/Stereo Switch

Additional Info

Additional Info

Brand Juicedlink
MFR SKU RA333
EVS SKU RA333
Name JuicedLink RA333 Riggy Assist Low-Noise Preamp
Specifications
Inputs 3-pin XLR Mic x3
Outputs 1/8" (3.5mm stereo mini jack)
Frequency Response 20Hz to 20kHz (approx +0dB / -1.5dB)
Maximum Gain Approx. 30dB max available gain
Phantom Power 48V phantom power, and power saving 12V phantom mode
Battery Power ​12hr battery life (no phantom, all 3 XLR inputs active, Alkaline battery)
> 20hr battery life (no phantom, all 3 XLR inputs active, LiPoly battery)
> 20hr battery life (no phantom, 1 XLR input active, Alkaline battery)
Switchable between Alkaline and LiPoly battery use (patent pending)
Selective power down mode to turn off portions of the preamp not being used (patent pending)
Dimensions 4.5 x 3.5 x 1.5" " (11.43 x 8.89 x 3.81cm)
Weight 8oz (226g) (approx)
juicedLink RA333 Riggy Assist Low-Noise Preamp
  • 1 Year Warranty
Includes
juicedLink RA333 Riggy Assist Low-Noise Preamp
  • 1 Year Warranty

Reviews

Write Your Own Review

You're reviewing: JuicedLink RA333 Riggy Assist Low-Noise Preamp

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality